Psion Teklogix PowerScan M8300 Bedienungsanleitung PDF herunterladen (Seite 11)

Desktop Mounting

Quick Reference Guide 5

Portable Desktop Use

1. Correctly position the BC-80X0 onto the base by sliding it along the

mounting tabs until aligned.

2. Carefully clean the rubber foot seats of the base to remove any impu-

rities that could reduce adhesion.

3. Remove the protective plastic from the rubber feet and stick them

onto the bottom surface of the base.

4. If mounting the BC-80X0 cradle, insert the antenna in the appropri-

ate hole on the body of the cradle and screw it clockwise until tight.

Fixed Desktop Use

For fixed desktop installation, use the adhesive strips or fixing screws

(not provided) according to your needs.

For mounting with adhesive strips:

1. Position the cradle onto the base by sliding it along the mounting

tabs until aligned.

2. Carefully clean the adhesive strip seats of the base to remove any

impurities that could reduce adhesion.

3. Remove the protective plastic from one side of the adhesive strips

and stick them onto the base surface.

4. Position the cables to be connected to the BC-80X0 cradle along the

dedicated channels, as shown in the figures below:

Horizontal Base

Inclined Base

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 25 26

Keine Kommentare

Psion Teklogix PowerScan M8300 Bedienungsanleitung Seite 11