Psion Teklogix PowerScan M8300 Bedienungsanleitung PDF herunterladen (Seite 7)

Quick Reference Guide 1

Using THE BC-80X0

Radio Cradle

The BC-80X0 cradle, paired with one or more PowerScan™ M8300

readers, builds a Cordless Reading System for the collection, decoding

and transmission of bar-coded data.

It can be connected to a Host PC through an RS-232, USB, Wedge or

Pen cable and is suited for single-cradle point-to-point layouts. It can

also be connected to a C-BOX and therefore integrated into a fixed

scanner application.

The BC-8060 models also allow multi-cradle layouts through an RS-485

Network. For this network connection refer to the PowerScan™ D8330/

M8300 User Manual.

The label on the cradle has LED indicators and a scan finder button.

When the button is pressed, the cradle transmits a “broadcast”

message. All properly configured scanners (Radio RX Timeout set to

keep the radio “awake”) that are linked to that base (through a bind or a

join sequence) and within radio range coverage will emit a beep

sequence once every 2 seconds for 30 seconds. This functionality is

useful to:

• verify which scanners are linked to a certain base station

• detect a scanner forgotten somewhere

The LEDs signal the BC-80X0 status, as described in the following table:

*This LED refers to the accessory SBS-8000 Spare Battery Slot when

mounted to the BC-8060. Not available for BC-8010 models

LED STATUS

Aux Yellow On = BC-80X0 is powered by an external power supply.

Yellow Blinking = transmission occurs over the Host port.

Host Yellow On = BC-80X0 is powered by the Host.

Yellow Blinking = transmission occurs over the Host port.

Reader Green On = the reader battery is completely charged.

Red On = the reader battery is charging.

Orange Blinking = reader battery fault – replace battery.

Red / Green Alternatively Blinking = charging error - see Ref.

Manual

Spare* Green On = the spare battery is completely charged.

Red On = the spare battery is charging.

Orange Blinking = spare battery fault — replace battery.

Red / Green Alternatively Blinking = charging error — see Ref.

Manual

1 2 3 4 5 6 7 8 9 10 11 12 ... 25 26

Keine Kommentare

Psion Teklogix PowerScan M8300 Bedienungsanleitung Seite 7