Psion Teklogix 9160 G2 Bedienungsanleitung PDF herunterladen (Seite 186)

100

101

Chapter 15: Configuring VLANs

Configuring VLANs

162 Psion Teklogix 9160 G2 Wireless Gateway User Manual

necessary, check with the infrastructure support administrator regarding the

VLAN and DHCP configurations.)

Table 15.1 Virtual Wireless Network Settings

Field Description

Virtual Wireless

Network

You can configure up to 6

VWN

Enabled

You can enable or disable a configured network.

• To enable the specified network, check the Enabled checkbox beside the appropriate VWN.

• To disable the specified network, uncheck the Enabled checkbox beside the appropriate

VWN.

If you disable the specified network, you will lose the VLAN ID you entered.

VLAN ID

Provide a number between 1 and 4094 for the Internal VLAN.

This will cause the access point to send DHCP requests with the VLAN tag. The switch and the DHCP

server must support VLAN IEEE 802.1Q frames. The access point must be able to reach the DHCP

server.

Check with the Administrator regarding the VLAN and DHCP configurations.

SSID

Enter a name for the wireless network as a character string. This name will apply to all access points on

this network. As you add more access points, they will share this SSID.

The Service Set Identifier (SSID) is an alphanumeric string of up to 32 characters.

Note: If you are connected as a wireless client to the same AP that you are administering,

resetting the SSID will cause you to lose connectivity to the AP. You will need to recon-

nect to the new SSID after you save this new setting.

1 2 ... 181 182 183 184 185 186 187 188 189 190 191 ... 435 436

Kommentare zu diesen Handbüchern

Keine Kommentare

Psion Teklogix 9160 G2 Bedienungsanleitung Seite 186

Kommentare zu diesen Handbüchern