Psion Teklogix 7535 G2 Bedienungsanleitung Seite 212
- Seite / 372
- Inhaltsverzeichnis
- FEHLERBEHEBUNG
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
Chapter 6: Peripheral Devices & Accessories
Operator Controls
182 Psion Teklogix 7535 G2 Hand-Held Computer User Manual
• Install the IEC power cord and apply power.
A green indicator in the lower-right indicates power is present. All charge indicators flash
momentarily at powerup to indicate that the charger is ready for operation.
If you choose to wall mount the charger, follow the instructions packaged with the mounting
bracket kit. Be sure to locate the charger in an area where there is no risk of injury to persons
walking in the vicinity.
6.5.2 Operator Controls
The gang charger does not have operator controls or a power switch.
6.5.3 Charge Indicators
Each battery charge slot is equipped with a tri-coloured LED to indicate the charge status of
the battery. When 7535 G2 batteries are inserted in the charger, the colour and behaviour of
the LEDs associated with the charge wells in use indicate the status of the charge.
Table 6.1 Gang Charger Indicators
LED Behaviour Icon Charge Status
Off No battery detected in the slot.
Solid green Battery is fully charged.
Flashing green Battery is charged to 75% capacity.
Solid yellow Charge in progress.
Flashing yellow Battery temperature out of charge range between 5° C
to 39° C (41° F to 102° F). This icon indicates that the
charger is waiting to charge. Charging is attempted
every five minutes until the battery is within the appro-
priate temperature range.
Solid red Battery rejected (at insertion) or unable to complete
charge on battery
Flashing red Charging circuit problem. Refer to “Troubleshooting”
on page 183.
- Hand-Held Computer 1
- Disclaimer 2
- What is RoHS? 4
- RoHS Logo 4
- TABLE OF CONTENTS 5
- Chapter 5: Configuration 8
- Contents 10
- Chapter 7: Specifications 12
- Appendix A: Port Pinouts 12
- Appendix C: Bar Code Settings 13
- PROGRAM LICENSE AGREEMENTS 17
- IMPORTANT – READ CAREFULLY: 18
- APPROVALS AND SAFETY SUMMARY 23
- Laser Warnings 27
- INTRODUCTION 1 31
- 1.1 About This Manual 33
- 1.2 Text Conventions 34
- 1.3 7535 G2 Features 34
- Two formats available: 35
- Tether Port with: 36
- Docking station port with: 36
- Chapter 1: Introduction 37
- Aperture 39
- 1.4.2 Regulatory Labels 40
- BASIC CHECKOUT 2 41
- 2.1 Features Of The 7535 G2 43
- 2.3 Powering Up The 7535 G2 44
- Chapter 2: Basic Checkout 45
- Attaching The Hand Strap 47
- Attaching The Pistol Grip 48
- 2.6 Configuring Your Radio 49
- 2.7.1 Assigning An IP Address 55
- 2.7.2 Name Servers Tab 56
- 2.7.3 Advanced Features 57
- Assigning The IP Address 59
- 2.8.2 Name Servers Tab 60
- Figure 2.12 SCU Main Tab 61
- 2.9 Checking The Scanner 63
- 2.10.2 Using Windows Vista 64
- 2.11 Resetting The 7535 G2 65
- ETTING TO KNOW YOUR 7535 G2 3 67
- 3.1 The Battery 69
- 3.1.3 Battery Chargers 70
- 3.3 The Keyboard 73
- 3.3.1 Modifier Keys 74
- 3.3.2 The Keys 75
- Alphanumeric Keyboard: 58-Key 78
- Numeric Keyboard: 36-Key 79
- 3.4 The Display 80
- 3.4.2 Adjusting The Contrast 81
- 3.5 7535 G2 Indicators 82
- Figure 3.2 Keyboard LEDs 83
- Function Charge LED Behaviour 83
- 3.5.2 Onscreen Indicators 84
- Figure 3.3 Taskbar 85
- Onscreen Indicators 86
- 3.5.3 Audio Indicators 87
- 3.6 Internal Scanners 88
- 3.6.1 Scanning Techniques 89
- 3.6.2 Scan LED Indicators 89
- 3.6.3 Troubleshooting 90
- 3.10 General Maintenance 94
- Cleaning The 7535 G2 95
- WINDOWS EMBEDDED CE 5.0 4 97
- Navigating Using The Keyboard 100
- 4.3 The Startup Desktop 101
- 4.3.1 The Desktop Icons 102
- 4.3.2 The Taskbar 103
- The Taskbar 104
- 4.4 The Start Menu 105
- 4.4.2 Security Settings 106
- 4.4.1 The Desktop 106
- Security Settings 107
- 4.4.3 Programs 108
- 4.4.4 Shortcuts 109
- Shortcuts 110
- 4.4.5 Settings 111
- 4.4.6 Run 112
- 4.4.7 Shutdown 112
- 4.5 Using A Dialog Box 113
- Using A Dialog Box 114
- CONFIGURATION 5 115
- 5.1 Remote Connect 119
- 5.2 The TekTerm Application 119
- 5.3 Pocket PC Compatibility 119
- 5.4 The Control Panel 119
- 5.5 Control Panel Icons 120
- Chapter 5: Configuration 121
- Control Panel Icons 121
- 5.6.1 App Launch Keys 124
- App Launch Keys 125
- 5.6.2 Certificates 127
- 5.6.3 Display Properties 128
- Display Properties 129
- 5.6.4 Input Panel 132
- 5.6.5 Keyboard Properties 133
- Keyboard Properties 134
- 5.6.6 Manage Triggers 144
- Manage Triggers 145
- Power Management Properties 148
- 5.6.8 Stylus Properties 154
- Volume And Sounds Properties 155
- 5.7 Bluetooth Setup 156
- 5.7.1 Devices 157
- Services 159
- 5.7.2 Headset 161
- 5.7.3 Servers 162
- 5.7.4 Outgoing 163
- 5.7.5 Active Conn 164
- 5.7.6 Properties 165
- 5.8 Error Reporting 166
- 5.9 IPv6 Support 167
- 5.10 Scanner Settings 168
- 5.10.1 Bar Codes 169
- Bar Codes 170
- Restoring Default Settings 170
- 5.10.2 Options 171
- 5.10.3 Translations 173
- Translations 174
- Tr an s l a ti on s 175
- 5.10.4 Ports 176
- 5.11.1 Contact 182
- 5.11.2 Communities 183
- Communities 184
- 5.11.3 Trap Destination 185
- 5.11.4 Permitted Hosts 186
- Permitted Hosts 187
- 5.12 The Storage Manager 188
- 5.12.2 Creating Partitions 189
- 5.12.3 Partition Management 190
- Partition Management 191
- 5.13.1 ErrorLogInfo 193
- 5.13.2 NetLog 193
- 5.14 Teklogix Imagers 194
- 5.15 Total Recall 195
- Creating A Backup Profile 196
- 5.15.2 Restoring A Profile 199
- 5.16 TweakIT Settings 200
- Advanced 201
- 5.16.2 User 204
- 5.16.3 Registry Editor 206
- 6.1 External Bar Code Readers 209
- 6.3 Batteries 210
- 6.4 Battery Charging 210
- 6.5 Gang Charger 211
- 6.5.2 Operator Controls 212
- 6.5.3 Charge Indicators 212
- 6.5.4 Charging Batteries 213
- 6.5.5 Troubleshooting 213
- 6.6 Combo Charger 214
- 6.6.2 Operator Controls 215
- 6.7 Combo Dock 216
- 6.8 Quad Dock 217
- 6.8.4 Network Access 218
- 6.8.2 Indicators And Controls 218
- 6.8.3 Using The Quad Dock 218
- 6.8.5 Battery Charging 219
- 6.8.6 Troubleshooting 219
- Portable Docking Module (PDM) 220
- 6.10 Bluetooth Peripherals 222
- The 7535 G2 Picker Cradle 223
- 6.11.2 Wiring Guidelines 224
- Powered Cradle Installation 226
- 6.11.8 The Port Replicator 227
- 6.12 Tether Adaptor Cables 228
- SPECIFICATIONS 7 229
- 7.1.1 Hardware 231
- Chapter 7: Specifications 232
- Hardware 232
- 7.1.2 Software 233
- 7.2 Radio Specifications 234
- 7.3 Internal Scanner Port 235
- 7.4 RFID Applications 236
- 7.5 External Scanners 236
- 0 Lux to 100,000 Lux 237
- Minimum Range Maximum Range 237
- Mil Size Inches Inches 237
- Parameter SE1200HP SE1200LR 237
- Parameter SE1200ALR SE2223PDF 239
- Parameter SE1224HP 241
- Parameter SE1524ER 242
- SX5400* Imager Specifications 245
- 7.7.1 PowerScan 246
- PowerScan 247
- APPENDIX A 253
- A.1 Tether Port Pinout 255
- A.2 Docking Station Connector 255
- A.3 Battery Contacts 256
- Battery Contacts 257
- APPENDIX B 259
- B.1 SCU Tabs 261
- B.1.2 Profile 262
- SCU Tabs 263
- B.1.3 Status 267
- B.1.4 Diags 267
- B.1.5 Global 268
- APPENDIX C 273
- C.1 Bar Code Settings 277
- Bar Code Settings 278
- C.2.1 Options 280
- Decoded (Internal) Scanners 281
- Code Type Length 282
- C.2.5 Code 39 284
- Field Size 286
- C.2.6 Code 128 287
- C.2.7 EAN 13 288
- C.2.8 EAN 8 288
- C.2.9 UPC A 289
- C.2.10 UPC E 289
- UPC/EAN Shared Settings 290
- C.2.12 Code 93 291
- C.2.13 Codabar 292
- C.2.14 MSI Plessey 293
- C.2.15 Interleaved 2 of 5 294
- C.2.16 Discrete 2 of 5 295
- C.2.18 Composite 296
- C.2.19 PDF-417 296
- C.2.20 Micro PDF-417 297
- C.3 Decoded (Intermec ISCP) 298
- C.3.3 Code 39 299
- Decoded (Intermec ISCP) 300
- C.3.4 Code 128 301
- C.3.5 EAN 13 302
- C.3.6 EAN 8 303
- C.3.7 UPC A 303
- C.3.8 UPC E Settings 304
- C.3.9 UPC/EAN Shared Settings 304
- C.3.10 Code 93 305
- C.3.11 Codabar 306
- C.3.12 MSI Plessey 307
- C.3.13 Code 11 308
- C.3.14 Interleaved 2 of 5 308
- C.3.15 Matrix 2 of 5 309
- C.3.16 Discrete 2 of 5 310
- C.3.17 Telepen 310
- C.3.19 Composite 312
- C.3.20 TLC-39 312
- C.3.21 PDF-417 313
- C.3.22 Micro PDF-417 313
- C.4 Imager 314
- Imager Options 315
- C.4.2 Imager Advanced Options 316
- Imager Advanced Options 317
- C.4.3 Code 39 318
- C.4.4 Code 128 319
- C.4.5 EAN 13 319
- C.4.6 EAN 8 320
- C.4.7 UPC A 320
- C.4.8 UPC E 320
- C.4.9 Code 93 321
- C.4.10 Codabar 321
- C.4.11 Interleaved 2 of 5 321
- C.4.13 Composite 322
- C.4.14 PDF-417 322
- C.4.15 Micro PDF-417 323
- C.4.16 2D Data Matrix 323
- C.4.17 2D QR Code 323
- C.4.18 2D Maxicode 324
- C.4.19 2D Aztec 324
- C.4.20 Postal: PlaNET 324
- C.4.21 Postal: PostNET 325
- C.4.22 Postal: Australian 325
- C.4.23 Postal: Japanese 325
- C.4.24 Postal: Korean 326
- C.4.25 Postal: Royal 326
- C.4.26 Postal: Kix 326
- C.4.27 Postal: Canadian 326
- C.5 Non-Decoded Scanners 327
- C.5.1 Options 328
- C.5.2 Code 39 328
- Non-Decoded Scanners 329
- C.5.3 Code 128 330
- C.5.4 EAN 13 331
- C.5.5 EAN 8 332
- C.5.6 UPC A 332
- C.5.7 UPC E 333
- C.5.8 Codabar 334
- C.5.9 Code 93 334
- C.5.10 Code 11 335
- C.5.11 Interleaved 2 of 5 336
- C.5.12 MSI Plessey 336
- C.5.13 Discrete 2 of 5 337
- C.5.14 IATA 2 of 5 338
- APPENDIX D 339
- D.1 Required Applets 341
- D.2 Presets 341
- D.2.1 Predefined Presets 342
- D.3.2 Selecting A Camera 345
- D.3.4 Viewing A Preset 345
- Modifying A Custom Preset 346
- Removing A Custom Preset 347
- D.4.1 Selecting A Camera 348
- D.4.3 Viewing A Preset 349
- D.4.9 Viewing A Preset 352
- Creating A Custom Preset 353
- D.4.16 Advanced Tab 358
- D.5 Teklogix Scanners Applet 359
- See also batteries 180 362
- Bluetooth radio 362
- (scanner double-click) 142 362
- (scanner double-click) 141 362
- See also Picker cradle 193 363
- See also Picker Cradle 193 367
- Decoded (Internal) 367
- See SNMP 151 370
- See picker cradle. 193 370
- See Start Menu 75 372
© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.033 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern