Psion Teklogix netpad Bedienungsanleitung PDF herunterladen (Seite 147)

Psion Teklogix netpad Windows CE .NET 4.2 User Manual 121

Chapter 7: Configuring Communications

Cisco 802.11b DS SS PC Card Radio

Keep in mind that the allowable values are dependent on the power table pro-

grammed into the netpad. Table 7.1 outlines these values.

Table 7.1 Transmit Power Options

Notes: Reducing the transmit power level conserves battery power but decreases

radio range.

If the netpad is running, ACU queries the adaptor and displays the settings

programmed into the adaptor. If the netpad is not running, ACU displays

power level options based on the last known radio type.

When World Mode is enabled (see page 120), the netpad is limited to the

maximum transmit power level allowed by the country of operation’s regu-

latory agency.

If you are using an older version of a 340 or 350 series PC card, your

power level options may be different from those listed here.

Offline Channel Scan

Enabling this parameter causes the netpad to periodically scan for a better access

point with the same SSID, if the signal strength falls below 50%. The default value

is Enabled.

Note: If you plan to use any of the security features (Static WEP or LEAP) and

require further details on the security feature you want to activate, please

refer to the Cisco product documentation web site:

http://www.cisco.com/en/US/products/hw/wireless/ps4555/products_insta

llation_and_configuration_guide_chapter09186a008015486c.html.

Refer to the IEEE 802.11b Standard for more information on 802.1X

authentication and to the following URL for additional information on

RADIUS servers: http://www.cisco.com/univercd/cc/td/doc/product/soft-

ware/ios120/12cgcr/secur_c/scprt2/scrad.htm.

Values Card Type

The default value—Max— represents the maximum level programmed into

the netpad and allowed by your country’s regulatory agency.

Max, 100 mW, 50 mW, 30 mW, 20 mW,

5 mW or 1 mW

350 series PC and LM cards.

1 2 ... 142 143 144 145 146 147 148 149 150 151 152 ... 229 230

Keine Kommentare

Psion Teklogix netpad Bedienungsanleitung Seite 147