Psion Teklogix netpad Bedienungsanleitung PDF herunterladen (Seite 88)

Chapter 4: Configuring The netpad

Options

Psion Teklogix netpad Windows CE .NET 4.2 User Manual

Scan Beep

When this parameter is ON, a beep is played on a successful scan. When it is OFF,

no sound is played.

4.3.1.2 Double Click

Click Time (msec)

This parameter controls the maximum gap time (in milliseconds) for a double-click.

If the time between the first and second clicks of the scanner trigger is within this

time, it is considered a double-click. The allowable range is 0 to 1000. A value of

zero disables this feature. The default value is 250.

To execute a double-click, first fire the scanner's laser by pressing the scanner

button, but do NOT attempt to decode a bar code immediately. Next, press the

button to trigger the laser once while the laser is still firing, then attempt to decode a

bar code. If successful, you will see the double-click data following the bar code.

Note: If you are having difficulty with this feature, adjust the value in the Laser-

On Time parameter (page 63).

A double-click produces different results depending on whether or not a value is

assigned in the Click Data parameter (below). When a value is not assigned for the

Click Data, double-clicking initiates a normal scan sweep. If a value is assigned for

the Click Data parameter, double-clicking the scanner trigger inserts the Click Data

value after the bar code.

Note: I you want to insert the click data without the bar code, execute the double-

click procedure without scanning the bar code.

Click Data

This parameter determines which character is sent following a double-click. Enter

the ASCII value of the character desired from 0 to 255 by clicking on the on-screen

keyboard keys (both upper and lower case). The default character is 00 and is input

with the <Esc> key.

1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 229 230

Keine Kommentare

Psion Teklogix netpad Bedienungsanleitung Seite 88